-20%
O’SKOOL 18 Inch(457mm) Miter Gauge Fence system
$207.07
- Designed to be universal, it will fit most bench tools with any standard 3/4″ x 3/8″(19 x 9.5mm) track with a 1/8”(3.175mm) “T” slot . The slide bar has a locking washer fit into to the “T” slot to prevent accidental lifting when feeding your stock through,If your saw does not have a “T” slot, you can remove the locking washer.
- 18″(457mm) long aluminium fence complete with flip-up length stop.
- The steel miter bar is equipped four sprung loaded ball bearings on the side of the bar ,the sprung loaded ball bearings ,the bearings can be adjusted with the provide hex key wrench in or out to keep the bar snug in the track.
- Ideal for cross-cutting wood at a specific angle, zeroed at a 90 degree, it allows the wood to be cut at any angle between 0 and 90 degrees(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°).
- Improve safety and accuracy on the table saw and the router table.
Out of stock
buy on amazon
The fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect mitres quickly.
The solid steel protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°, both left and right. 13 pre-set common angles in total.
The bar is 18″(457mm) long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4″ x 3/8″) track or similar sized T-slot.
Four sprung loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.
Product information |
||||||||||||||||||||
|
Only logged in customers who have purchased this product may leave a review.
Related Products
-13%
Table Saw Accessories
Delta Power Equipment Corporation 36-501 Zero Clearance Throat Plate
$94.05
Reviews
There are no reviews yet.