Oro-Tek Tire Pressure Monitoring Sensor
Direct TPMS provides real-time information of tire pressure using pressure monitoring sensors in the tires to let the driver know tire inflation condition to improve the safety on the road.
Sensor provides seamless communication with vehicle.
TPMS Light
Warning Failure To Follow Instruction Or The Use Of Improper Tpms Sensors May Result In The Motor Vehicle Tpms Failure Causing Property Damage, Personal Injury Or Death.
About
Installation
ORO-TEK sensors are replacements for motor vehicles that have factory installed Tire Pressure Monitoring System (TPMS). Caution each TPMS sensor is designed and manufactured to operate in a specific vehicle make, model, and year. Please make use of application guide and determine the proper sensor for your vehicle.
Read all instructions and warnings before installation. Improper installation will cause the motor vehicle TPMS system to fail to operate properly. Sensors always should be installed and paired to your vehicles ECU by a trained professional reference to the owner’s manual.
Do not install sensors in damaged wheels. If the TPMS system fails to operate properly, check all installation procedures to ensure proper installation. ORO-TEK is here to assist you troubleshoot any issue you may be having.
If the OEM equipment wheels or tires are not used, it is the responsibility of the vehicle owner to ensure that the TPMS system is functioning properly. The vehicle owner expressly assumes sole and complete responsibility for the TPMS and vehicle function if the OEM equipment wheels and tires are not used. Failure to ensure that the TPMS system is functioning properly may result in severe injury or death.
Caution :
Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is Mandatory to replace the grommet, nut, and valve core to ensure proper sealing.
Metal Valve Stem Install
|
|
|
|
|
|---|---|---|---|
Step 01Insert valve stem into the valve hole of the wheel. |
Step 02Install washer and hexagonal nut onto valve stem. |
Step 03Use wrench to hold valve stem and keep vertical. Meanwhile use torque wrench to tighten hexagonal nut with 4.0 N.m. (0.2) torque. |
Step 04Finished. |
Rubber Valve Stem Install
|
|
|
|
|---|---|---|
Step 01Insert valve stem into the valve hole of the wheel. |
Step 02Use valve stem tool, pull the rubber valve stem through until seated. |
Step 03Finished. |
Product information |
||||||||||||||||||||||||||||||
|
Only logged in customers who have purchased this product may leave a review.
Related Products
Replacement Tire Pressure Monitoring System (TPMS) Sensors
TOYOTA OEM Tire Pressure Monitoring System (TPMS) Transmitter (FCC ID: GQ4-45T, P/N: 42607-0C070)
Reviews
There are no reviews yet.